Tweet
For sale G0250 sadly I need to part with the old girl, I have put on too much weight.HTL B8m Bensen 503 rotax DCSI23 hoursMotor just replaced with a good second hand motor 23ft Bert Larkin blades60 inch Brolga prop in ok condition.Raptor designs helmetASI, Rotax tacho, EGT, hourmeter.Spare seat tank as one on the machine has perished.comes with 2 spare 503 motors and one spare gearbox. Spare motors are dead and in bits but good for parts, gearbox is good but wrong ratio for the brolga prop.Has brand spanking new Bing carburettors and also two spare carbs in working order. Set up for a 90-100kg pilot.Bensen tow hook on front if you feel the urge to drag it behind a car.This is a very basic machine that I used to get my licence. Very easy to fly, perfect for a first Gyro. The rotor blades have developed a balance problem and I would recommend they be replaced, being Bert Larkins with unknown hours or history. However they are not flyable but may be fixable. The motor starts first pull nearly every time and has lots of spare parts. If you are looking for a beginners gyro then this is it. She has been my old faithful for about 8 years now but sadly I have put on too much weight and I cant get anymore than 50ft of the ground when the weather is above 35 degrees. Considering where I live temps below 35 don"t happen very often. Plus the new RAF takes up too much room and the missus says one has gotta go.Located at Bedourie south West QLD. Can take to SE QLD on my next trip over if need be.
Comment